PDA

View Full Version : Interlock lossnay mitsubishi



Aircon467
06-07-2013, 01:39 PM
Hiya,


Anyone know how to link lossnay unit to a split system working on a par 30?

Thanks

install monkey
06-07-2013, 04:47 PM
theres a cable with the lossnay to hook it up to a mr slim indoor and use that controller for lossnay functions

Slim R410a
08-07-2013, 04:04 PM
As per above - It's the cable that is always supplied with the install manual taped to the top of the Lossnay.

This plugs into CN2L on the indoor pcb, (on your split) connect a 2-core 0.75mm CY cable from this onto your Lossnay and connect to TM2 terminals 1&2 on the Lossnay pcb.

Go into service mode on the PAR-30 and into function settings. Select Mode 2 to setting 2 (for without lossnay outside air onto indoor unit) or setting 3 (for lossnay outside air onto indoor unit) depending on your fresh air setup.

Aircon467
16-07-2013, 10:50 AM
Thanks guys