PDA

View Full Version : Daikin Wall Split Fault



domrushton
04-07-2013, 12:13 PM
Hi thanks in advance for any help but i work at a remote gas plant in north west australia and i am out of ideas as to how to fix 1 of our units.

The problem is the indoor unit is not responding, no lights nothing.

I have checked voltage both indoor an outside units, i have pressure in the system and i have changed all pc boards in an outside. The outside pc board has a green blinking LED which i ashume is normal but i cannot get the indoor unit to do a thing. No bleep wen ON selected and no lights. Batteries r good in remote too before any1 asks lol.

If any1 can shed any light id be very gratefull

The Viking
04-07-2013, 07:38 PM
Tried the emergency run switch?

Otherwise, model number would be useful...


:cool:

frank
04-07-2013, 07:38 PM
Model numbers would help ...lol

install monkey
04-07-2013, 09:02 PM
check ur cabling in between 1,2,3 - check for joints in cables, isolators, and in oz animals nibblin through cables- should have a green flashing led on indoor too
also check 20mm glass fuse on the outdoor pcb as usually power to outdoor