PDA

View Full Version : Cu/Ni condenser,32 bar,9 kW for R410A/salted water



Vymeniky
12-02-2006, 10:34 AM
Hello,
for our new generation of swimming pool heat pumps, we need to switch over to the new refrigerant R410A, which means we need a pressure rating on the refrigerant side at least 32 bar (450 psig?).

At the same moment we need to use salted pool water on the secondary side.

Can anybody deliver any condenser 32 bar, 9 kW capable of handling salted water? (Cu/Ni, titanium coaxial possibly)

I am ready to send the calculation of a (plate) condenser that we need to replace.

Awaiting any suggestion.
with advance thanks

Martin Pekarek
info@vymeniky.cz

Tycho
12-02-2006, 06:05 PM
www.alfalaval.com (http://www.alfalaval.com/ecoreJava/WebObjects/ecoreJava.woa/wa/showNode?siteNodeID=5430&contentID=-1&languageID=1)

very satisfied with their plate exchangers, we use them as seawater cooled condensers on RSW plants with ammonia.

US Iceman
13-02-2006, 12:27 AM
Why are you using R-410a on a heat pump? I would almost certainly recommend a lower pressure refrigerant for heat pumps.

rbartlett
02-03-2006, 05:38 PM
Why are you using R-410a on a heat pump? I would almost certainly recommend a lower pressure refrigerant for heat pumps.


Pretty much all the heat pumps in the Uk are now 410a

cheers

richard

Peter_1
02-03-2006, 08:49 PM
What's the company's website?