PDA

View Full Version : Ite benders







grovecoooling
27-06-2013, 10:27 PM
Hi folks

my Ite hydraulic benders are knackered and are leaking oil, does anyone know where I can buy spare parts.

install monkey
27-06-2013, 10:35 PM
send em backto ite-otherwise top it up with a more viscous oil

cooltools
21-09-2013, 08:23 AM
Would love to know where you can get them fixed as every time we send benders back we are told cheaper to replace with new .......and we got 7 install teams so over the years thats lot of benders.

install monkey
21-09-2013, 09:55 AM
u can normally spot benders from their clean overalls and squeeky voice! :o

Would love to know where you can get them fixed as every time we send benders back we are told cheaper to replace with new .......and we got 7 install teams so over the years thats lot of benders.

monkey spanners
21-09-2013, 11:57 AM
Take them to bits and see what seals they have, expect you would be able to get one online or at a hydraulic place.

ballvalve
10-12-2013, 09:56 PM
I ordered a new spring for mine through ite and they delivered it to our wholesalers . Found a exploded pic of the benders with the part number on each piece on their web site Fixed it myself for 5€

install monkey
10-12-2013, 10:08 PM
i topped mine up with vac pump oil - as a screwfell out the back and leaked oil through the back plate

NewmanRef
11-12-2013, 08:09 PM
Would love to know where you can get them fixed as every time we send benders back we are told cheaper to replace with new .......and we got 7 install teams so over the years thats lot of benders.

Teach your men to bend with lever arm benders instead of the crossbows. Much cheaper to replace and generally don't break. We use them up to 3/4 then jump on hilmor stand ups.

Quality
13-12-2013, 09:44 AM
Take them to bits and see what seals they have, expect you would be able to get one online or at a hydraulic place.

I have repaired a set before, the seals etc are standard hydraulic stuff as you suggested