View Full Version : How to control a servo motor with a force sensitive resistor?

31-05-2013, 06:20 PM
I need very simple instructions on how to connect all the circuitry. Step by step instructions if possible please.
The goal is when you put pressure on the FSR the servo motor turns, and when you release pressure it turns back.
The servo should move in the same direction and speed as the pressure. But with greater force if that is possible.

31-05-2013, 09:59 PM
Red to black, black to red, blue to bits

02-06-2013, 01:00 PM
IS this for a HVAC/R circuit?

install monkey
02-06-2013, 04:52 PM
could you not use a pressure transducer- giving a variable output proportionate to pressure