PDA

View Full Version : Electrolux ESE21HRA







AGSelec
31-05-2013, 04:26 AM
Hi Guys,
I am trying to sort a problem out with a electrolux split. It works fine on cooling, however, on heating it starts up but the outdoor fan stops after about 2 seconds and the system continues to run outdoor will frost up and heating very poor. My thought were sensors they appear to be fine indoor temp about 5k and pipe about 5k. outdoor i measured 37k and was lowering as the temp raised. any thoughts i dont have a service manual but the midea which is similar (guess same Chinesse factory) says in heating compressor on fan except defrost.