PDA

View Full Version : HITACHI RCUE180AG2. (R407c)



CV_Geardrive
30-05-2013, 08:29 AM
Hi all,
I have a chiller HITACHI RCUE180AG2. (R407c)
The chiller is air cooled with 3 circuits and 3 PHE.
It has 3 screw compressors 50ASC-7.
The control has 4 digits (2+2) and 4 buttons. (ON, OFF, UP and DOWN)
Behind controller there is a board with lot of dip switches.
I need for this chiller, control and compressors any info you can give me.
Thank you in advance,
CV

install monkey
30-05-2013, 07:48 PM
samurai
same logic/pcb as the set free
http://www.mediafire.com/view/bff92l9z313tb8r/samurai_technical.pdf
:)

CV_Geardrive
03-06-2013, 04:52 AM
Dear Install Monkey,
Thank you for this valuable info.
With best regards,
CV