PDA

View Full Version : Can i jet wash the outdoor unit



Aircon467
15-05-2013, 11:02 PM
As thread title,

If i isolate power can i jet was from the front of the unit through the fans onto the coils at the back, or will water damage the fan motors?

Reason :
less dust than blowing nitro through
Poor access
Speed
Hopefully good result.

Any comments

The Viking
15-05-2013, 11:42 PM
Coil cleaner?

In short, the answer to your question is yes.
Watching apprentices jetwash coils through the fans is one of the great pleasures in life... Sadly like so many other pleasures one that never lasts for long. As there is more water ending up on the apprentice than on the coil they soon learn to do it from behind or just use a coil cleaner.

:cool:

Brian_UK
15-05-2013, 11:45 PM
Also don't get too close or you will wreck the coil fins.

Aircon467
16-05-2013, 09:26 PM
The units have been poorly installed and have poor access to rear and sides... One of few installs ive seen this rubbish.

I'll be taking over the maintenance contract and want a quick method that uses minimal water ie jet wash .... Can do a full dirty car with 25ltr

Aircon467
16-05-2013, 09:27 PM
Ps thanks for input.... Ive seen the mess high pressure washing can do to a coil... By been too close.

monkey spanners
16-05-2013, 10:19 PM
Take the fan off and wash it out that way, no risk of water in the motor then. Don't use coil cleaner unless you are going to really rinse the coil well afterwards as it will rot the fins once the water evaporates and leaves the chemical behind.

install monkey
16-05-2013, 10:23 PM
take the motor out aswell as the blade as you know ur gonna drown it!!!:D

FreezerGeezer
17-05-2013, 09:47 AM
Or put a bag over the motor & tape / tie it so it's reasonably water tight.
I have done it through the fans, after removing the the grille first! Not too bad that way, if you engage your brain. ;)

Aircon467
17-05-2013, 03:58 PM
My dad always taught me to bag it tight 😉 lol