xarios 150

[mark roberts]

hello, ive been out of transport for a while seen the light ! ive been looking at a xarios 150 with fault code po7 which i beleive is evap fan motor fault, it works when it feelslike ,ive checked pins on micro connector allgood and motor amp draw 7.4 when it does run am i right to think the micro is on the way out ? :)

[IRMechanik]

hello, ive been out of transport for a while seen the light ! ive been looking at a xarios 150 with fault code po7 which i beleive is evap fan motor fault, it works when it feelslike ,ive checked pins on micro connector allgood and motor amp draw 7.4 when it does run am i right to think the micro is on the way out ? :)

the p in p07 means it's a stored code. If it were active it would be a07. To clear the code press on + and - at the same time. The north american units are a little different than yours so I'm afraid I'm not much help. The controller connections on the NA integra 40/50x units are complete rubbish and are forever burning the pins and giving code 07.

[mark roberts]

thanks ill give it a shot :cool:

[wilt]

Hi Mark looks like your back in the fold again, like me lol! Ex MTK now MFS

[mark roberts]

yes not really back in the fold couldnt quite manage that ! who is this give me a clue !