joanna
12-04-2013, 05:43 PM
Hello!
I design a dry evaporator.The fluid in the shell side is 30% calcium chloride aqueous solution .According TEMA standard .the non-abrasive,single-phase fluid,If the ρV2 not exceed 2232 kg/m.s2.needn't impingment plate on the shell side. Does the cacl2 belongs to the abrasive fluid,need I put the shell-side impingment?
I design a dry evaporator.The fluid in the shell side is 30% calcium chloride aqueous solution .According TEMA standard .the non-abrasive,single-phase fluid,If the ρV2 not exceed 2232 kg/m.s2.needn't impingment plate on the shell side. Does the cacl2 belongs to the abrasive fluid,need I put the shell-side impingment?