PDA

View Full Version : Refrigeration system in cold countries



Ambrish_bajpai
06-03-2013, 08:00 AM
Hello everybody

I am design engineer for propylene based refrigeration system which will be located in cold countries. Ambient temperature varies from -32 C to 44.8 C. can anybody tell about special precautions that we need to take care while designing refrigeration system for ambient conditions??

kayern
06-03-2013, 09:06 AM
Hey.

Design systems with free cooling option. (saves a lot of power)
Heating element in compressors.
Control of condenser fans, for high enough condenser pressure at low outdoor temperatures.

Which company do you work for?

Regards
Kay

Ambrish_bajpai
06-03-2013, 11:33 AM
Thanks Kay for such a prompt reply

can you please advice me on the selection of motor for ambient conditions such as -32 C to 44.8 C?
and do we need steam tracing / electric tracing for lube oil system

kayern
06-03-2013, 03:42 PM
You say that there is a propylene-based cooling system......
Is it a water cooled evaporator and air cooled condenser?
What temperature should you have on the water? 7/12 degrees?
I must know a little more about the system design to make recommendations, but maybe that it's a secret :-)

Kay

Ambrish_bajpai
07-03-2013, 01:28 PM
You say that there is a propylene-based cooling system......
Is it a water cooled evaporator and air cooled condenser?
What temperature should you have on the water? 7/12 degrees?
I must know a little more about the system design to make recommendations, but maybe that it's a secret :-)

Kay

thanks for prompt reply

It is water cooled condenser and water inlet outlet temperature is 32/42 during summer .

Ambrish_bajpai
15-03-2013, 05:21 AM
It is water cooled condenser and water inlet outlet temperature is 32/42 during summer .[/QUOTE]


I need your assistance .. please reply