what are best method to cool reversing valve when install it

[kefah]

hi
what are best method to cool reversing valve when install it
i saw some people cool it using muds
some other use wet rig
and other using material they called it heating gel

so what is the best method

[Tesla]

Hi kefah
I have used the heat gel and had no failures from overheating. Also it allows enough time to heat the pipe well enough to seal with welding. I had used wet rags in the past but also had leaks which had to be re welded.

[kefah]

Hi kefah
I have used the heat gel and had no failures from overheating. Also it allows enough time to heat the pipe well enough to seal with welding. I had used wet rags in the past but also had leaks which had to be re welded.

thank you man
can you explain more about heating gel material
because i didnt find it in iraq

[Brian_UK]

Have a look at this...
http://www.youtube.com/watch?v=LzkLfiYlE5g

[Grizzly]

Interesting post, thanks Guys.

I did not even know this stuff existed.
One question though, as it evaporates. What's its shelf life like?
Grizzly

[Tesla]

Not sure Grizzly but I had some in the back of the ute more than two years old. I wouldn't consider doing a four way valve without it.

[jdunc2301]

Cool gel stuff looks quite good, i'll have a look about getting something and giving it a go.

In the past some old rags that are soaked with water, wrapped tightly around the valve has done the trick.

No problems yet...

[Brian_UK]

Haven't used mine in a while but still workable. got it from Climate Center.

[install monkey]

pyrokool is ok but the kool gel is better- last 4 way i did i had it submerged in a bucket and brazed the pipework onto it and then brazed onto the system with at least 12 inch of pipe on the tails so no dramas
did a carrier eurotop 4 way 1 3/8 stubbs with wet rags and used 6ltr spray doc full of ice and water and had a chimp keep the rag cold!-again no dramas

[monkey spanners]

Fire! Fire!

http://www.youtube.com/watch?v=r6aIUA1fWfI

[kefah]

thanx all for help
i want to know what is thhat cooling gel
what is content

[install monkey]

http://www.laco.com/productDetail15.aspx
data sheet doesnt state whats in it

[jdunc2301]

thanx all for help
i want to know what is thhat cooling gel
what is content

What the content is...is irrelevant. If it's not readily available i would stick with the basic field tested methods. Wet rag etc, or do as Install Monkey says and sumbmerge the valve in water, however DONT GET WATER IN THE VALVE.... you should know why not.

[install monkey]

http://www.mediafire.com/?u24c193vvmyuapv,y9kfd6ygxwgx6r4,dvdced1co7kgjxl,ouzbm4xwwbolahj,ujrjrjxtcb1qs33,0r8zchb435kfq22,qy7 zg4fbfu4imoy
piccys of my rv replacement

[jdunc2301]

http://www.mediafire.com/?u24c193vvmyuapv,y9kfd6ygxwgx6r4,dvdced1co7kgjxl,ouzbm4xwwbolahj,ujrjrjxtcb1qs33,0r8zchb435kfq22,qy7 zg4fbfu4imoy
piccys of my rv replacement

True pro at work....except the lumpy braze........:D

Deserve Rep points for this!

[install monkey]

been in for 3 month- note how the sticker on the body isnt scorched- also glo stick drops in the water, 2 others had allegedly repaired leaks on the system- small tubes had rubbed together so opted for the replacement option- and the quality of the braze is irrelevant as long as it doesnt leak as you only get a change to seal it before u refit it to the system:cool:

True pro at work....except the lumpy braze........:D

Deserve Rep points for this!

[jdunc2301]

You know im only teasing IM...its common knowledge that i cant braze for ****!

;) im still waiting to be accepted as a friend on FB...cannot wait!!

[kefah]

thank guys
i have more question
after i install the RV
and before charging the system
how i can check if the RV working properly or not

[Brian_UK]

thank guys
i have more question
after i install the RV
and before charging the system
how i can check if the RV working properly or notYou can't really because the RV needs systems operating pressures to move the valve shuttle inside.

[monkey spanners]

Magnet trick to show rv is working (only works when system running with refrigerant in)

http://www.youtube.com/watch?v=tsJLuTrezwo

[kefah]

thank u guys
you really helped me
i appreciate that

[kefah]

thank you all
please close the thread