kefah
10-02-2013, 09:14 PM
hi
i have marshal 2 ton split unit r22
in heating mode it work perfectly
the outdoor fan never stop working
then discharge temp is 110 c
suction is 55 c
13 amp current
compressor is not hot
i set indoor unit to 32 c
but the outoodr fan never stop spinning
and water is continue flow from outdoor unit
i suspect the indoor sensor on pipes may be not fixed correctly so i unpluged it then plugged it
so the outdoor fan stopped work and compressor kept running
after one day
i turned on the split so
the fan and compressor kept working never stoped until the room temp is reached 32 c
so both comp and fan stopped
so what the cause of the problem
i have marshal 2 ton split unit r22
in heating mode it work perfectly
the outdoor fan never stop working
then discharge temp is 110 c
suction is 55 c
13 amp current
compressor is not hot
i set indoor unit to 32 c
but the outoodr fan never stop spinning
and water is continue flow from outdoor unit
i suspect the indoor sensor on pipes may be not fixed correctly so i unpluged it then plugged it
so the outdoor fan stopped work and compressor kept running
after one day
i turned on the split so
the fan and compressor kept working never stoped until the room temp is reached 32 c
so both comp and fan stopped
so what the cause of the problem