koolkatz
06-02-2013, 11:47 AM
hello, i have a york screw chiller with the motor down to earth, i would like to strip this motor on site and remove the winding for repairs.
does anybody have a manual for this chiller showing the internal configuration or has repaired this chiller.
the motor is suction cooled and there is a flange connecting the motor to the compressor.
any help would be greatly appreciated as i cannot get any information from the local york agents.
does anybody have a manual for this chiller showing the internal configuration or has repaired this chiller.
the motor is suction cooled and there is a flange connecting the motor to the compressor.
any help would be greatly appreciated as i cannot get any information from the local york agents.