PDA

View Full Version : My sixth refrigerating unit



Freezerman-Rus
27-01-2013, 01:14 PM
All hello!
Decided to assemble independently refrigerating unit, at present collected the sixth. Look, estimate, can what offers or remarks will be?

Freezerman-Rus
27-01-2013, 01:16 PM
Still photo

install monkey
27-01-2013, 01:17 PM
nice job- fit a solenoid valve on the oil return so when the unit is at temperature and pumped down it doesn't constantly cycle on lp

install monkey
27-01-2013, 01:25 PM
usually a panel mounted isolator with interlock to ensure its isolated before opening the door- sorry, I have a habit of snagging systems:confused:

install monkey
27-01-2013, 01:39 PM
inverter drive on the compressor, panel mounted so you can see loading/frequency- also this will have loss of phase protection

install monkey
27-01-2013, 01:43 PM
http://www.schneider-electric.co.uk/sites/uk/en/products-services/electrical-distribution/products-offer/metering-monitoring/power-monitoring-devices/powerlogic-ion6200.page

al
27-01-2013, 03:41 PM
Excellent layout, plenty of space to work on.

al

Freezerman-Rus
27-01-2013, 04:28 PM
Inverter costs much. Protection against jumps and on a phase is established to tension (To the relay of the Russian production RNPP-311P - very good, convenient and not expensive)

Freezerman-Rus
27-01-2013, 04:33 PM
Tension relay RNPP-311M