PDA

View Full Version : Panasonic gas vrf


and1dude2001
24-01-2013, 06:37 PM
Came to run up 2 panasonic gas vrf and had the A06 fault code which is engine start failure, I'm presuming its due to no ignition but has anyone else experienced this? Is there something iv missed on commissioning?
install monkey
24-01-2013, 07:41 PM
is the gas line purged?
and1dude2001
24-01-2013, 08:05 PM
Yeah and was measuring 21 mbar. Have you commissioned one of these before? It's running on natural gas and as fa as I can remember from the last one I did was literally open the gas and address and turn on. I maybe wrong though I have no memories of anything going wrong though.
install monkey
24-01-2013, 08:29 PM
not commissioned 1- reset 1 by pushing button and had to ring tony duffy!! will pm you his moby number;)
Yeah and was measuring 21 mbar. Have you commissioned one of these before? It's running on natural gas and as fa as I can remember from the last one I did was literally open the gas and address and turn on. I maybe wrong though I have no memories of anything going wrong though.
and1dude2001
24-01-2013, 09:12 PM
Thanks. Anyone else got any input?
monkey spanners
24-01-2013, 09:31 PM
Easy start!

http://www.youtube.com/watch?v=PGMUGjlV5HU
install monkey
24-01-2013, 09:35 PM
bump start it!!:D- did you get ur message??
and1dude2001
24-01-2013, 10:07 PM
Yes I did pal thanks. Haha brilliant