View Full Version : Clean Burnt Out Tube Chemical
MayankBhatia
19-01-2013, 05:33 PM
Hi friends
Actually i want to clean out Copper tubes which contain lot of carbon burnt out particles and other contaiminates. I tried with direct flushing but all in vane..So any body could suggest me a good cleansing agent which can clean all evaporator tubes especially long Condenser tubing?
chillerman2006
19-01-2013, 05:36 PM
honeywells R245
R's chillerman
MayankBhatia
19-01-2013, 05:49 PM
is it comapaitible with R134a?and will it disperse when come in contact with air?
chillerman2006
19-01-2013, 05:51 PM
its boiling point is just below 16*c so will totally vapourise
good cleaning solvent with similar uses as R11
R's chillerman
MayankBhatia
19-01-2013, 07:20 PM
Do you think so this can go all around a long condenser tubing ,As this can vaporise at 16*C?
its boiling point is just below 16*c so will totally vapourise
good cleaning solvent with similar uses as R11
R's chillerman
chillerman2006
19-01-2013, 09:47 PM
you can put it in a jug/drum and pour it in
it will boil off at first but once tubing is down below 16*c it will run as liquid ok
or cap the end plus add shraeder
its a degreaser/solvent so will clean thoroughly and can then pour it out when done
any residual will vapourise
R's chillerman
MayankBhatia
20-01-2013, 04:02 PM
Thanks Man...Il try out
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.