Expansion valve equivalent

[mre212]

Dear all,
What is the equivalent Danfoss Expansion valve for ALCO:
XC726HW100-2B
MOP code/100
Operating range/+13....-45°C
R22
Orifice:X9117-B7B

Regards&Thanks

Email: r.e951@yahoo.com

[install monkey]

ALCO T-SERIES TAKE-A-PART THERMO VALVE
T-SERIES TAKE-A-PART VALVE LARGE CAPACITY 22 TO 100 TONS (R22 NOMINAL – BALANCED PORTED AND
BI FLOW)
STEP 1: SELECT CAGE FROM CAPACITY TABLE
NOMINAL CAPACITY — TONS CAGE ASSEMBLY
PART NO VALVE TYPE R-22 R-507/R-404A R-502 R12 R134a R407C 1 PART NO 1 DESCRIPTION
ALC-077896 * TER 22 14 14 13 16 22 ALC-077896 * X9117B6B
ALC-078117 * TER 26 16 16 15 19 26 ALC-078117 * X9117B7B
ALC-071155 * TER 35 21 21 20 25 35 ALC-071155 * X9117B8B
ALC-029429 * TER 45 27 27 25 31 45 ALC-029429 * X9117B9B
ALC-070738 * TIR 55 37 37 35 45 55 ALC-070738 * X9166B10B
ALC-071238 * THR 55 37 37 35 45 55 ALC-071238 * X9144B10B
ALC-020846 * THR 70 48 48 45 55 70 ALC-020846 * X9144B11B
ALC-021067 * THR 85 60 60 55 68 85 ALC-021067 * X9144B13B
ALC-065123 * TMR 100 60 – 55 68 100 ALC-065123 * X9144B14B
NOTE: Nominal capacities shown here are based on 40°F evaporator temperature and 100°F
vapor-free liquid refrigerant entering the valve. R-12 and R-134a rated at 60 PSID.
All other refrigerants rated at 100 PSID.
(1) Gaskets included on cage.
Gasket strip X13455-1 (PCN: 027579) replaces all older T-series gasket kits.
STEP 2: SELECT FLANGE
SIZE & STYLE CONNECTIONS
PART NO VALVE
TYPE
FLOW INLET OUTLET BODY FLANGE
DESCRIPTION
ALC-027919 * TER 2 ANGLE 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 9153
ALC-027918 * TER 2 STRAIGHT-THRU 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 9152
ALC-027926 * TIR ANGLE 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 9151
ALC-028849 * TIR STRAIGHT-THRU 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 9150
ALC-028030 * THR ANGLE 1-1/8 ODM 1-1/8 ODM 9149
ALC-028032 * THR STRAIGHT-THRU 1-1/8 ODM 1-1/8 ODM 9148
ALC-065124 TMR 2 ANGLE 1-1/8 ODM 1-1/8 ODF 9149-1
ALC-065125 TMR 2 STRAIGHT-THRU 1-1/8 ODM 1-1/8 ODM 9148-1
2 TER- TMR flange includes extended length cap screws.
STEP 3: SELECT POWER ASSEMBLY
TCL-TCLE-TJLE-TJR POWER ASSEMBLIES 3
PART NO REFRIGERANT
EQUALIZER
TYPE
CAP
TUBE
LENGTH
APPLICATION
TEMP RANGE
APPLICATION
MOP 4 (psi)
POWER ASSEMBLY PART NO
ALC-052957 * R12 ¼ SAE 10 FT. -20 to +40 NONE XC-726 FC 2B ALC-052957 *
ALC-035000 * R12 ¼ SAE 10 FT. -50 to +50 55 XC-726 FW55 2B ALC-035000 *
ALC-056421 * R22 ¼ SAE 10 FT. -20 to +50 NONE XC-726 HC 2B ALC-056421 *
ALC-024511 * R22 ¼ SAE 10 FT. -50 to +5 35 XC-726 HW35 2B ALC-024511 *
ALC-025011 * R22 ¼ SAE 10 FT. -50 to +30 65 XC-726 HW65 2B ALC-025011 *
ALC-059333 * R22 ¼ SAE XC-726 HCA2B ALC-059333 *
ALC-036750 * R22 ¼ SAE 10 FT. -20 to +50 100 XC-726 HW100 2B ALC-036750 *
ALC-040569 R22 ¼ SAE 10 FT. -50 to +10 NONE XC-726 HZ 2B ALC-040569
ALC-057235 * R134a ¼ SAE 10 FT. -20 to +50 NONE XC-726 MC 2B ALC-057235 *
ALC-057372 R134a ¼ SAE 10 FT. -50 to +50 55 XC-726 MW55 2B ALC-057372
ALC-063075 R134a ¼ SAE 10 FT. -50 to +10 NONE XC-726 MZ 2B ALC-063075
ALC-052958 * R502 ¼ SAE 10 FT. -20 to +50 NONE XC-726 RC 2B ALC-052958 *
ALC-023351 * R502 ¼ SAE 10 FT. -50 to -20 15 XC-726 RW15 2B ALC-023351 *
ALC-070866 * R502 ¼ SAE 10 FT. -50 to +5 35 XC-726 RW35 2B ALC-070866 *
ALC-071421 R502 ¼ SAE 10 FT. -50 to +25 65 XC-726 RW65 2B ALC-071421
ALC-046692 * R502 ¼ SAE 10 FT. -50 to +10 NONE XC-726 RZ 2B ALC-046692 *
ALC-062303 R404A ¼ SAE 10 FT. -20 to +50 NONE XC-726 SC 2B ALC-062303
ALC-063127 R404A ¼ SAE 10 FT. -50 to +10 40 XC-726 SW40 2B ALC-063127
ALC-061692 R404A ¼ SAE 10 FT. -50 to +25 65 XC-726 SW 65 2B ALC-061692
ALC-063974 R404A ¼ SAE 10 FT. -50 to +10 NONE XC-726 SZ 2B ALC-063974
(3)Cap screws included with Power Assembly
(4) Maximum Operating Pressure Limit to prevent motor overload
THERMOSTATIC EXPANSION VALVES
34

[install monkey]

http://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=2&cad=rja&ved=0CEIQFjAB&url=http%3A%2F%2Fwww.carlyleccrp.com%2Fsite%2Fcatalog07%2FALCO%2FALCO-001.pdf&ei=FYPoUMLfEYSp0AWokYGwAw&usg=AFQjCNFbsy8xML0jwAYYLaNjCBD1BQ6_dQ&sig2=tzAeJUA588tze8iKsIsA_w&bvm=bv.1355534169,d.d2k page 34 for your alco valve

[install monkey]

http://www.danfoss.com/BusinessAreas/RefrigerationAndAirConditioning/Products/Literature/RA/Thermostatic-Expansion-Valves/f7df9628-016d-4e10-9945-c4c97bb9d760.html danfoss selection page- good luck theres loads of em

[mre212]

I am looking for Danfoss Expansion valve

[install monkey]

I posted the alco spec for you to identify the rest of the valve,including capacity to help you identify your danfoss equivelent
I am looking for Danfoss Expansion valve

[chemi-cool]

http://www.johnstonesupply.com/storefront/product-view.ep?pID=B14-133

[hookster]

I would recommend fitting an electronic expansion valve as a replacement this you can justify from the energy saving and the multi use should they decide to change the refrigerant.

The Carel EXE valves http://www.carel.com/carelcom/web/eng/catalogo/gamma_dett.jsp?id_gamma=108
are the easiest valves to commission in the market and can be set in four easy steps.

For selection Ev2V24B would suit your application.

http://www.carel.com/carelcom/web/download?nome_file=/carelcom/web/@extsrc/@common/@catalogo/@documenti/@istruzioni/050001225.pdf

[mre212]

operating range of ALCO +13....-45°C But i have to cool down the brine to -38°C is that ok?

[hookster]

Are you designing a new system or doing a parts replacement? You do not really want to operate in a vacuum with R22 so your TD is getting very close but will suffice just be sure you have selected the correct refrigerant for your requirement. I would have selected R507 or R404a.

The exe valve I selected will give you a refrigerant duty of 10-14 Kw.

[mre212]

http://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=2&cad=rja&ved=0CEIQFjAB&url=http%3A%2F%2Fwww.carlyleccrp.com%2Fsite%2Fcatalog07%2FALCO%2FALCO-001.pdf&ei=FYPoUMLfEYSp0AWokYGwAw&usg=AFQjCNFbsy8xML0jwAYYLaNjCBD1BQ6_dQ&sig2=tzAeJUA588tze8iKsIsA_w&bvm=bv.1355534169,d.d2k page 34 for your alco valve
Is APPLICATION TEMP RANGE given by °C or°F

[install monkey]

degree's f

[sandybapat]

Dear mre212

Instead of finding equivalent of Alco valve you can specify what is the pressure at inlet of valve, what is the evaporation temperature expected and what is the capacity of valve either in Tons or in kW required and what is the temperature of refrigerant before expansion valve and you should be able to select thermostatic expansion valve of danfoss from heir catalog. Let me know your email ID, I will send catalog.

Sandybapat

[mre212]

Hello all,and thank you for reply
my system consist of two bitzer compressors type: S6F-30.2 and one evaporator 40KW (Plate & shell heat exchanger). i use Cacl2 brine as secondary coolant(-38°C) So is ALCO will be OK or not
ALCO:
XC726HW100-2B
MOP code/100
Operating range/+13....-45°C
R22
Orifice:X9117-B7B
and what is the difference between this ALCO and Danfoss TEX12 -40°C/+10°C with Orifice 3

Regards & Thanks

Email: r.e951@yahoo.com

[sandybapat]

Dear mre112

Danfoss catalog sent to your email ID.

Sandybapat