Fan Motor

[...CooLMan...]

Hi all,

and a very Merry Christmas.

I've got to change a fan motor on a Mitsibishi PKA-RP71FAL. Never changed or seen one before. Can this job be done with the wall mount on the wall or does pumping down? Also, are there any special tools I need for the job?

Thanks for your time.

[install monkey]

yep- no degassing- just strip the bugger to just a coil and backplate, allen key for the grub screw on the impellor, I recommend replacing the end bearing too-good luck

[...CooLMan...]

Thanks install monkey,
I've only been given a motor so will have to wait if its still making a noise.

Cheers

[install monkey]

before you go on site, check the motor isn't damaged, I drove 180 mile to oxford, signed in on site, opened the box to find the plastic body cracked!!

[Grizzly]

You have a good point there IM.
Thankfully not to often.
But I have known issues with spares straight from the box.
Sometimes the wrong part entirely!
Your onto a winner when you actually have the part in your hand.
When they are sent direct to site, Well!
Grizzly

[...CooLMan...]

I'll check.

Cheers.

[install monkey]

check ur e mail too:cool:

[...CooLMan...]

Thanks Install Monkey.
I needed that!

Merry Christmas

[...CooLMan...]

Smooth motor replacement.

Thanks