clunky
19-12-2012, 08:00 AM
Hi
I have had a problem with the above ff, the ice sensor cable fractured and shorted the main board resulting in a totally dead machine.
Finally after almost 2 months of waiting for parts, I have replaced the main board and ice sensor and everything seems to be working fine.
Apart from I have no display on the door.
No lights at all, but the buttons all work, just can't see anything.
Subsequently I have no idea what the current settings are.
Any ideas how to check if the pcb behind the display panel itself is blown as well?
Or any other suggestions as how to get the display to light up?
Many thanks in advance.
I have had a problem with the above ff, the ice sensor cable fractured and shorted the main board resulting in a totally dead machine.
Finally after almost 2 months of waiting for parts, I have replaced the main board and ice sensor and everything seems to be working fine.
Apart from I have no display on the door.
No lights at all, but the buttons all work, just can't see anything.
Subsequently I have no idea what the current settings are.
Any ideas how to check if the pcb behind the display panel itself is blown as well?
Or any other suggestions as how to get the display to light up?
Many thanks in advance.