Tuscan or elm universal

[cryotec]

Can any body reprogram one for me as i am having trouble finding hand held programmer unit
i can bring it round to you 30 mile radius of Bradford willing to pay for your time.

[Tayters]

Isn't there a way of doing it through the display. I know you can get the probe temps but thought there was also a way of getting into some programming mode as long as you had the parameter list of your paticular unit to know what the first 2 digits meant.

Failing that and any other offers get yourself to Southampton and I'll do it with me handset. Even make a brew for you!

[cryotec]

i have the list but don’t know the procedure of getting in to program mode

thanks for your offer 250 miles bit to far......

[joe-ice]

Dont know if it helps but rdm front ends are/were supposed to be compatible with genus networks and controllers .Probably easier to get hold of one of them than the old elm handsets.

[cryotec]

managed to get handheld unit can some one walk me through changeing the settings as it is i can only get few pages and not all the setting listed in the setup document

[chillled]

Send me your number if you're still struggling and I will help out. Based in Oldham
cheers
Jon

[cryotec]

tuscan5 190797-ybt and universal 8 chanel alarm 190797-yav
are these units job espacific ? i thought thy could be programed to do different jobs
i want danfoss akv valve with air on & off and gas on & off and forsed deftost by externel timer

[frank]

i want danfoss akv valve with air on & off and gas on & off and forsed deftost by externel timer
I've got a Danfoss AKA 21 programming module and the Danbuss comms box sitting on the shelf in the stores

[Silhouette]

YBT won't do AKV control, you need EE? prefixed controller for electronic expansion valve control with ELM!

[sparky39]

try a company called building energy control based in bradford they will sort it out for you