PDA

View Full Version : Tuscan or elm universal







cryotec
14-12-2012, 06:10 PM
Can any body reprogram one for me as i am having trouble finding hand held programmer unit
i can bring it round to you 30 mile radius of Bradford willing to pay for your time.

Tayters
14-12-2012, 08:48 PM
Isn't there a way of doing it through the display. I know you can get the probe temps but thought there was also a way of getting into some programming mode as long as you had the parameter list of your paticular unit to know what the first 2 digits meant.

Failing that and any other offers get yourself to Southampton and I'll do it with me handset. Even make a brew for you!

cryotec
14-12-2012, 09:09 PM
i have the list but don’t know the procedure of getting in to program mode

thanks for your offer 250 miles bit to far......

joe-ice
14-12-2012, 09:29 PM
Dont know if it helps but rdm front ends are/were supposed to be compatible with genus networks and controllers .Probably easier to get hold of one of them than the old elm handsets.

cryotec
15-01-2013, 11:31 PM
managed to get handheld unit can some one walk me through changeing the settings as it is i can only get few pages and not all the setting listed in the setup document

chillled
23-01-2013, 10:09 PM
Send me your number if you're still struggling and I will help out. Based in Oldham
cheers
Jon

cryotec
28-01-2013, 10:27 AM
tuscan5 190797-ybt and universal 8 chanel alarm 190797-yav
are these units job espacific ? i thought thy could be programed to do different jobs
i want danfoss akv valve with air on & off and gas on & off and forsed deftost by externel timer

frank
28-01-2013, 04:22 PM
i want danfoss akv valve with air on & off and gas on & off and forsed deftost by externel timer
I've got a Danfoss AKA 21 programming module and the Danbuss comms box sitting on the shelf in the stores

Silhouette
04-02-2013, 02:41 PM
YBT won't do AKV control, you need EE? prefixed controller for electronic expansion valve control with ELM!

sparky39
04-02-2013, 03:35 PM
try a company called building energy control based in bradford they will sort it out for you