PDA

View Full Version : City multi



ballvalve
13-12-2012, 11:53 PM
Trying to do an acid test on a Pury p250 yem-a city multi.anyone any idea how to get oil out without reclaiming gas.
Cheers

install monkey
13-12-2012, 11:58 PM
connect a gauge line (no manifold!) haha- carrier/hrp do an acid,moisture test kit you connect to the system and it vents gas for a few minutes- never tried them so cannot gaurentee the accuracy- city multi's have oil seps on so not easy to get a sample of oil

ballvalve
14-12-2012, 12:02 AM
Cheers.ye it's not looking good at least with a sanyo vrf there's a oil line port to take some oil from.

stufus
14-12-2012, 12:35 AM
Line tap valve on the oil line after solenoid on compressor side.
Cheers
Stu

ballvalve
14-12-2012, 08:56 AM
Not sure about line tap valve they tend to leak after a while.

cspeed
14-12-2012, 07:54 PM
Climate ctr sell a 2 second acid test that you put onto a schraeder valve. Never used one so cannot comment on its accuracy.

Craig