PDA

View Full Version : Controller for Carrier 4 pipe fan coil 42EM



Brian_UK
12-12-2012, 10:18 PM
[edit: I'm a dummy, can't even get the model right, it's a 42EM]

Does anyone know which model remote controller goes with this 42EM carrier fan coil unit.

The unit has an NTC communicating controller attached but I can't identify the remote controller required to match it.

I have found details on the CRC2 and Aquasmart controls but they don't mention this fan coil model.

Any help welcomed.

install monkey
12-12-2012, 10:36 PM
The Aqualia may be provided with a 3-speed Carrier electronic
wall thermostat.
With this option each Aqualia can be equipped with an “on/off”
type water control valve and flexible water pipes to simplify
the connection of units to the primary hot and/or chilled water.
This electronic thermostat option also includes a male-female
quick connect terminal block for connecting the different wires
from the fan motor, valve actuators, the electric heater and the
heating/cooling changeover switch for Aqualia units equipped
with a single “heating or cooling” coil.

install monkey
12-12-2012, 10:42 PM
http://www.mediafire.com/view/?b4f6ox2r15500uq

install monkey
12-12-2012, 11:40 PM
last resort dave.stronghill@carrier.utc.com

Brian_UK
13-12-2012, 10:34 PM
Thanks for the info IM, sadly the controller used for the 42EL is different, as well as me putting up the wrong model myself, it's a 42EM not EW; doh!

Emailed Carrier today with the full model number as well as the control pack details that comes with the unit and the first reply was - "Can you send me a picture?". Doesn't inspire too much confidence. ;)