View Full Version : WTK plate heat exchanger as a condenser
klimek
12-12-2012, 09:13 AM
Anyone has expirence with WTK plate heat exchanger (P7-20)as a condenser
Is hot gas from compressor should be connected to the top or bottom?
thank you
Brian_UK
12-12-2012, 10:33 PM
Pipe connections depend on the model number reference, see here...
http://www.wtk.it/en/prod_piastre_monocircuito.asp
klimek
13-12-2012, 07:12 AM
Thanks Brian UK belive me but there is no information about it
But with the plate heat exchanger came installation manual 9857
and it says from the bottom but I think its incorrect
Peter_1
14-12-2012, 03:51 PM
Discharge allwyas on top so that the condensed liquid can flow down.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.