WTK plate heat exchanger as a condenser

[klimek]

Anyone has expirence with WTK plate heat exchanger (P7-20)as a condenser
Is hot gas from compressor should be connected to the top or bottom?
thank you

[Brian_UK]

Pipe connections depend on the model number reference, see here...
http://www.wtk.it/en/prod_piastre_monocircuito.asp

[klimek]

Thanks Brian UK belive me but there is no information about it
But with the plate heat exchanger came installation manual 9857
and it says from the bottom but I think its incorrect

[Peter_1]

Discharge allwyas on top so that the condensed liquid can flow down.