PDA

View Full Version : WTK plate heat exchanger as a condenser







klimek
12-12-2012, 10:13 AM
Anyone has expirence with WTK plate heat exchanger (P7-20)as a condenser
Is hot gas from compressor should be connected to the top or bottom?
thank you

Brian_UK
12-12-2012, 11:33 PM
Pipe connections depend on the model number reference, see here...
http://www.wtk.it/en/prod_piastre_monocircuito.asp

klimek
13-12-2012, 08:12 AM
Thanks Brian UK belive me but there is no information about it
But with the plate heat exchanger came installation manual 9857
and it says from the bottom but I think its incorrect

Peter_1
14-12-2012, 04:51 PM
Discharge allwyas on top so that the condensed liquid can flow down.