PDA

View Full Version : elm controler help and guidence?







cryotec
10-12-2012, 11:28 PM
Hi i want to try elm programing for eev tev , multi evep, multi comp etc

any body got some old units and progmerer not in use for sale or giveaway

please get in touch

cryotec
11-12-2012, 05:04 PM
Need help with one unit programed or a hand held elm unit for sale and data sheet with fault codes and parameters


I know i am late as i have found out that honeywell dont do elm any more

Can somebody help in next couple of days??

padraic
11-12-2012, 10:33 PM
one of our lads got brand new handset online somewhere.. will ask him where he got it

cryotec
14-12-2012, 06:04 PM
one of our lads got brand new handset online somewhere.. will ask him where he got it

Thanks look forward to yous reply

Mark
14-12-2012, 06:47 PM
http://www.refrigeration-engineer.com/forums/showthread.php?32576-Elm-set-up-unit

cryotec
15-01-2013, 11:40 PM
managed to get handheld unit it only showes set temp and blind times . cant get in to full set up mode con any body walk me through ?

fowlie
16-01-2013, 08:43 PM
what model of controller is it ?

cryotec
18-01-2013, 09:09 AM
tuscan5 190797-ybt and universal 8 chanel alarm 190797-yav
are these units job espacific ? i thought thy could be programed to do different jobs
i want danfoss akv valve with air on & off and gas on & off and forsed deftost by externel timer

Mark
18-01-2013, 07:29 PM
Hi Cyotec,

For AKV EEV you want an EEV or EEC control card. I cant recall the YBT doing EEV but I might be wrong as its been a while?.
The EEC range of controllers has a non adjustable alarm threhold, specifically set up for Somerfield but it depends what you can get hold of.

Most if not all controllers do Local or Remote defrost commands.

The 8 channel monitor is a card capable of reading 8 temperatures concurrently if set with different alias.

What specifically do you want to know?
Hope this helps.
Mark