JVR001
26-10-2012, 01:39 PM
Firs off all let me say Hello every one im new to this site and glad I found it.
Im an electrician and starting to play around with air cons at our company because we have comebacks if we use contractors, I’ve installed and repaired a few air cons and all is going well.
Thing is we have a old double glass door fuchsware fridge here by us so I thought I’ll fix’s it because its making hot and I thought usually it needs gas but here’s what I did.
I tested the compressors 3 connections and they all gives me a deferend small reading which is fine and I did an earth test all off this wasn’t necessary because the fridge is running but hot.
I then pulled a vacuum for 30 minuets I then loaded R134a gas up to 10psi its been running for about 3 hours now it is a little but cooler not much. Do I leave it to run so that the gas can distribute or did I miss something. Many thanks in advance and sorry for all the reading
Im an electrician and starting to play around with air cons at our company because we have comebacks if we use contractors, I’ve installed and repaired a few air cons and all is going well.
Thing is we have a old double glass door fuchsware fridge here by us so I thought I’ll fix’s it because its making hot and I thought usually it needs gas but here’s what I did.
I tested the compressors 3 connections and they all gives me a deferend small reading which is fine and I did an earth test all off this wasn’t necessary because the fridge is running but hot.
I then pulled a vacuum for 30 minuets I then loaded R134a gas up to 10psi its been running for about 3 hours now it is a little but cooler not much. Do I leave it to run so that the gas can distribute or did I miss something. Many thanks in advance and sorry for all the reading