PDA

View Full Version : MTA Phoenix







tchill
03-10-2012, 07:06 PM
Hi everyone, any suggestions on starting up above machine after not moving for
two years and moved to new installation?

Brian_UK
03-10-2012, 11:18 PM
Hi and welcome to the forum.

What exactly is your MTA Phoenix as a web search brings up a lot of different items under that title. Is it a chiller, a bus or anything similar?

tchill
11-10-2012, 03:16 PM
Hi Brian, it could very well double as a bus :-)
Air cooled 6 stage water chiller - make/model: MTA RAB782
Strange scenario as this is just a temperory installation:
Machine draws in excess of 600A at full load but client only has 200A available.
It is a trial-run and only 20% of full capacity will be needed. I understand that the
delivery capacity can be limited in the controller.
What I mostly need to know is..how to perform a pre-inspection and what to look out for.

Any input will be greatly appreciated.
Cheers!