View Full Version : Stulz Codes
Jasper
13-09-2012, 01:23 PM
Can anyone supply the access codes for Stulz C7000 controllers, we may have to commission some and are not sure if the codes will be with the units!!:eek:
install monkey
13-09-2012, 07:25 PM
the old stuff was press up and down within 5 seconds,and the display should show pass
Grizzly
13-09-2012, 09:42 PM
Hi Jasper.
Follow the link.
The info within the manual should help?
Grizzly
http://www.novemakulde.no/07/ins/57_c7000R_eng.pdf
Jasper
14-09-2012, 07:50 AM
Thanks both
The old up down arrow does not work on later controllers!
There is a code in the manual so will give that a try if we get the commissioning work
Thanks again
Jasper
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.