MATTHW
29-08-2012, 07:35 PM
Problem with Fujitsu ducted frigorias 6000 1 Day, 21 Hours
Karma: 0
hello I have a little problem forumers a frigorias 6000 fujitsu inverter. evaporator works correctly in the command I get error 001 communication error means indoor unit with outdoor unit. The indoor unit communicates between ny 3, the outdoor unit between n 3 n is set to 2 volts dc diode bridge is fine between anode and cathode leads not lead tips inverting input voltage V AC 230 have output diode bridge 230 v dc the red lid is off the fuses are correct. Change control PCB remains the same in my remaining two condenser plates more active power filter and a tiny module that is active filter. If anyone can help me and thank you very much from how to check these two
Karma: 0
hello I have a little problem forumers a frigorias 6000 fujitsu inverter. evaporator works correctly in the command I get error 001 communication error means indoor unit with outdoor unit. The indoor unit communicates between ny 3, the outdoor unit between n 3 n is set to 2 volts dc diode bridge is fine between anode and cathode leads not lead tips inverting input voltage V AC 230 have output diode bridge 230 v dc the red lid is off the fuses are correct. Change control PCB remains the same in my remaining two condenser plates more active power filter and a tiny module that is active filter. If anyone can help me and thank you very much from how to check these two