PDA

View Full Version : Hotpoint FZ175 Freezer - No Power



sev
29-08-2012, 12:03 PM
I have a 4 year old Hotpoint FZ175 freezer with no power.

The green power light does switch on. Nor do I hear the compressor running and everything inside the freezer has thawed :(

I plugged a kettle into the same power socket, the kettle works so there is power coming from the socket.

I changed the fuse like for like, still no power.

I assume some sort of electrical fault on the freezer, what would be the most common item to fail?

I'm willing to get my hands dirty to fix the freezer, so any and all suggestions are welcome.

sev
29-08-2012, 12:10 PM
I don't think I can edit the post so I will correct myself. The power light does NOT switch on.

tonto33
29-08-2012, 08:35 PM
pcb at fault send it to Qer.biz for testing and repair or get replacement from them
http://www.qer.biz/prodRepairsModel.asp

install monkey
29-08-2012, 08:38 PM
check fuse in the plug of the freezer, oh and coffee 1 seeing as youve just brewed:D

tonto33
29-08-2012, 08:40 PM
and give me some rep points:D

tonto33
29-08-2012, 09:37 PM
thanx for that install monkey :o

sev
30-08-2012, 11:53 AM
check fuse in the plug of the freezer, oh and coffee 1 seeing as youve just brewed:D

Yes I changed the fuse in the freezer's plug, as mentioned in my first post.


pcb at fault send it to Qer.biz for testing and repair or get replacement from them
http://www.qer.biz/prodRepairsModel.asp

Where do I access the PCB from the freezer?

tonto33
30-08-2012, 04:20 PM
open door look at top panel remove two screws one each side and gently pull forward panel and you will see pcb

sev
01-09-2012, 02:39 PM
Thanks tonto33. I see the pcb but I can't seem to remove one of the connectors, it has 7 wires and is the largest of all the connectors. Should I use brute force or is there a clip I should be looking for?

I checked out the site you recommend but there is only a 33% chance of success? That doesn't sound good to me. Where can I buy a new pcb? What numbers should I be looking for on the pcb to make sure I find the same model?

tonto33
01-09-2012, 04:50 PM
you can get one from hotpoint by they not programmed which there are from other site.
https://parts.hotpointservice.co.uk/b2c_ind2/catalog/setCurrentItem/(isQuery=yes&xcm=zhotpoint&layout=6_1_63_64_2&uiarea=2&ctype=areaDetails&next=seeItem&carea=%24ROOT&citem=00000143920000000102)/.do