View Full Version : Seawater cooled Condensor
tsf31
28-08-2012, 02:22 PM
Hi all,
I'm new to this forum and this is my first post. I hope I get some good response here.
For a seawater cooled condenser, will there be a cooling tower? Or will it be an open loop of seawater that cools the refrigerant?
Sandro Baptista
28-08-2012, 02:58 PM
It will be an open loop of seawater.
If you would use a cooling tower in a closed loop with the condenser then the condenser could work with fresh water.
Aquahort
29-08-2012, 11:54 AM
I've been using Titanium heatexchangers tube in tube since 1989, that is a plastic barrel with Titanium tubes. Put in a waterflow switch to turn off the thermostat power supply if no water. Put in HP/LP gauges to ensure the correct waterflow. Do not use a Titanium plate heatexchanger unless you can filter water down to 250 micron before the Heatexchanger/condensor.
sandybapat
03-10-2012, 11:48 AM
Is it for land based application or for marine vessel?
tsf31
04-10-2012, 04:48 PM
Its land based. I'll share more details later..
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.