PDA

View Full Version : Seawater cooled Condensor







tsf31
28-08-2012, 02:22 PM
Hi all,

I'm new to this forum and this is my first post. I hope I get some good response here.

For a seawater cooled condenser, will there be a cooling tower? Or will it be an open loop of seawater that cools the refrigerant?

Sandro Baptista
28-08-2012, 02:58 PM
It will be an open loop of seawater.

If you would use a cooling tower in a closed loop with the condenser then the condenser could work with fresh water.

Aquahort
29-08-2012, 11:54 AM
I've been using Titanium heatexchangers tube in tube since 1989, that is a plastic barrel with Titanium tubes. Put in a waterflow switch to turn off the thermostat power supply if no water. Put in HP/LP gauges to ensure the correct waterflow. Do not use a Titanium plate heatexchanger unless you can filter water down to 250 micron before the Heatexchanger/condensor.

sandybapat
03-10-2012, 11:48 AM
Is it for land based application or for marine vessel?

tsf31
04-10-2012, 04:48 PM
Its land based. I'll share more details later..