Sanyo p29 fault

[mattym]

Hi all one of my friends has a Sanyo ac system which is displaying p29 fault any idea what the fault is and what parts are req to fix thiis

[stufus]

P29 is a compressor fault or DCCT failure ,It basically telling you the inverter compressor failed to start.
Model numbers make this a whole lot easier....
Cheers
Stu

[anil130]

Hi all one of my friends has a Sanyo ac system which is displaying p29 fault any idea what the fault is and what parts are req to fix thiis
give me your email address i will send the PDF file including codes of VRF

[install monkey]

click on mattym then click view profile, then click about me then click download v card- member details are there
:)
give me your email address i will send the PDF file including codes of VRF

[anil130]

many many thanks brother..


click on mattym then click view profile, then click about me then click download v card- member details are there
:)

[shujin]

You need to check the HIC board and also to measure the windings of the inverter (hope you have some ohms on each windings). If its broken you can stll run the machine until you replace it using the dipswitch on MB.
Cheers