PDA

View Full Version : Help with a basic design for a Safari Vehicle



Jeromy Dacey
14-12-2005, 12:38 PM
Hi,
I have unfortunately no experience with design. Only service, installation and fault-finding.
I want to make a 125L freezer box for a commercial safari vehicle. The compressor i'll be using is a Danfoss BDF 35 12-24vdc type.
The evaporator will be static and wrap around the outside of the inner-box.
The condensor will be a small coil cooled by fan.
The expansion device will be a capillary tube.
Insulation thickness 50mm.
Ambient temperature 40 degC


Now is there a consultant agency that can assist with sizing up the components?
Or even better a book which could assist with basic designs?
I have specs of the compressor or they can be obtained from the Danfoss site.
http://www.danfoss.com
I am not on-line and only hook once every 2 day so please be patient.
Looking forward to some assistance.
Cheers
Jem





sanjemd@mweb.co.za