PDA

View Full Version : Mycom software selection







Sandro Baptista
14-06-2012, 01:50 PM
Hi Guys,

I've tried to get the last software at the MAYEKAWA at its web page but it's not available.

Try to get it from the general internet but no luck.

The version I have is the 4.11ep_j and it's very old...year 2000...

Does some has one at least less old than the mine.

Thanks

Josip
14-06-2012, 05:14 PM
Hi, Sandro :)

have the same and not sure if there is some new or newer version, let's wait ...


Best regards, Josip :)

RANGER1
14-06-2012, 09:28 PM
There is a new version but its a protected programme so cannot copy.
It has new series Mycom "J" screw on it (very similar to SGC Frick).

Sandro Baptista
15-06-2012, 09:03 AM
Some day I'll ask it to MAYEKAWA...however I doubt they give me.

Ranger1, how the program is protected? It is need a password?

RANGER1
15-06-2012, 10:01 AM
Sandro,
Put it this way it can't be send via email or a link or copy it, as far as I know.
We get a disc sent to us when an update occurs.
Same with JCI if your lucky!

Josip
17-06-2012, 04:18 PM
Hi, RANGER1 :)



Sandro,
Put it this way it can't be send via email or a link or copy it, as far as I know.
We get a disc sent to us when an update occurs.
Same with JCI if your lucky!

I have Coolware 8 from JCI (registered user), but update check is going automatically whenever I use a program ... of course checking my credentials ....

Is there some other JCI program required a disc for update? .... maybe for HVAC ... just asking?


The same is with Sabroe MatchMaster ... must be installed from original CD with embedded data of my company .. update is automatic online ... and not possible to copy and lend it ....


Best regards, Josip :)

RANGER1
18-06-2012, 09:34 AM
Josip,
I was refering to Matchmaster & Mycom having same restictions.
Makes it hard for people who do not have access.