philstead
29-05-2012, 02:45 AM
does any one know if this product below actually save without raising the space temp.
The ECO3TM or ESMTM is installed between the primary controller and the compressor in a customer's HVAC-R system. Smartcool's technology continuously monitors the compressor cycles to identify opportunities for energy savings. How savings are achieved is dependent on the nature of the customer's equipment.
Cycle Optimization
Smartcool's technology dynamically adjusts the length of each cooling cycle in order to help the compressor operate more often within the most efficient suction pressure band.
This solution is used by thousands of packaged air conditioning, refrigeration and heat pump systems around the globe.
Load Modulation
Smartcool's technology works within existing control methodologies to modulate load for periods of time during the cooling cycle.
This solution is used by thousands of chilled line systems worldwide.
With either solution, the technology will automatically pull itself out of the circuit when necessary to prevent over-cycling or temperature increases. Smartcool's solutions do not impact existing manufacturer warranties
The ECO3TM or ESMTM is installed between the primary controller and the compressor in a customer's HVAC-R system. Smartcool's technology continuously monitors the compressor cycles to identify opportunities for energy savings. How savings are achieved is dependent on the nature of the customer's equipment.
Cycle Optimization
Smartcool's technology dynamically adjusts the length of each cooling cycle in order to help the compressor operate more often within the most efficient suction pressure band.
This solution is used by thousands of packaged air conditioning, refrigeration and heat pump systems around the globe.
Load Modulation
Smartcool's technology works within existing control methodologies to modulate load for periods of time during the cooling cycle.
This solution is used by thousands of chilled line systems worldwide.
With either solution, the technology will automatically pull itself out of the circuit when necessary to prevent over-cycling or temperature increases. Smartcool's solutions do not impact existing manufacturer warranties