MCL Python

[headgasket]

MCL Pyphon C02 case. Does anyone know of a solution, to the problem of water retention in the base of the cabinets, caused by the force of the evap fans pushing water to the sides? Having problems now in a store as its leaking out of the seams at the sides, has been like this since it was installed over a year ago.:(

[install monkey]

if dc fans can you slow them down, otherwise- bigger drain stubs of the drip tray?

[headgasket]

Hi install monkey, you can't alter the drains, but I was thinking of lowering the fan speed as they are DC motors set at 1350 rpm, but that might affect the cabinet temp.

[sedgy]

hi headgasket, to drain the water you will have to fit a pee trap so the weight of the water can push against the force of the fans, and so drain away = sedgy,