View Full Version : Circuit Board for Waterfurnace EKW08 heatpump
mac_J
03-04-2012, 12:18 AM
Would like to know where I can purchase a Circuit Board for Waterfurnace EKW08 heatpump.
It is a single phase 230Volt unit.
All advice and comments appreciated
Regards
Tesla
03-04-2012, 08:35 AM
Hi mac
If you can't get the pcb you could just use a generic controller which works out cheaper more often than not. There are controllers available now for most applications with probes etc normally 240V four wire configuration.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.