PDA

View Full Version : Circuit Board for Waterfurnace EKW08 heatpump







mac_J
03-04-2012, 12:18 AM
Would like to know where I can purchase a Circuit Board for Waterfurnace EKW08 heatpump.
It is a single phase 230Volt unit.

All advice and comments appreciated

Regards

Tesla
03-04-2012, 08:35 AM
Hi mac
If you can't get the pcb you could just use a generic controller which works out cheaper more often than not. There are controllers available now for most applications with probes etc normally 240V four wire configuration.