thermoking container manuals

[jamcool]

Have a CFII thermoking unit,anyone has a manual i could use,here is the thing.
All the writings on the control is missing have now was of knowing what is what,HELP!!!!!!

[ewart]

Jamcool you may need to post a photo of this unit.
Ewart

[Reeferjon]

Hi WHich model is it, what controller...do you have a BM number

[ewart]

the BM number is 090171 and the serial number is 0324350730, this is jamcool using ewarts log in

[Reeferjon]

OK, no luck with the BM or S/No...
Its a CFII what model should be M something from 4 to 40....can you identify the controller model

[jamcool]

i see M19.3 as model number the thing is unit still icing back to the suction line,the charge has not changed read the sensors,coil 3670 ohms,return 3290 ohms,and discharge 3310 ohms I think those are ok,it has 9 relays on it K1 to K9 would like to know which control what also any manuals or wiring drawings that can be found.
ANY HELP WOULD BE GOOD
jamcool

[Reeferjon]

I have a manual in PDF for you, its 19meg...contactme off list.
John.

[canunez]

I have a CFII unit and I am looking for a manual. Did you ever find yours? Can you help me?

[Reeferjon]

please contact me off list.
JOhn.

[WBSERVICEFTW]

Help,

Does Anyone Out There Have A Service / Operations Manual For A Thermo King Cfii M37.
Container Unit. Or Know Where We Might Be Able To Find One. Any Help Would Be Greatly Appreciated....thanks

[C Bagtas]

Hi,
just try to check the suction trottle valve or the 3 way valve,before that is i found in our unit,our unit is refrigeration van that we use in aircraft.

[spool25]

Hello Guys,

I am also looking for Thermo King manuals. The two manuals I am looking for are

Parts Manual for SB-III 30 SR+
Maintenance Manual SB-III 30 & 50
SR+ µP-IV+

[tariqenng]

i need thrmoking mechecal rfigertion dia gram any one have please dend me

[tariqenng]

any one who can tell me about refigertion cyecal about thrmo king

[tariqenng]

I have a manual in PDF for you, its 19meg...contactme off list.
John.
ok
i willl get the model no

[Thermoking.kong]

have you tried a thermoking dealer
you will need the unit serial number

also this site wont allow me to mail it to you as its 23 mb

[tariqenng]

is anyone have service manuals of xmt thrmoking

[thermo prince]

Hi Tariq Engg.

Are you working for transport company or a service agent there? XMT is an old generation nosemount truck freezer unit from 1970's - early 80's powered by either Onan or Wisconsin gasoline engines.
Abbar in Jeddah and Riyadh may be able to help with manuals and parts.
Some countries 'repower' these with Yanmar or Kubota diesels and continue to run them today.
If Abbar cannot help w/ parts contact me offline. There's a warehouse nearby me where a large inventory of old hard to find parts for XMt, XKW.XRW and NWD stocked.

Its not a 'Container' unit or Reefer unit like CF11/CSR/CRR as fitted on 20'/ 40' ISO ocean going boxes.

Spool 25 - which part of USA do you work and likewise are you working with owner/transport or a repair company?
Did you try local agent or MPLS Hq for these? If you are an owner or in the trade, they would be happy to oblige I'm sure.

[REEFER-TEK]

I have a full library collection of all makes and models of TK and CTC units in PDF.

I would like to complete my collection with a Deltec Vector and X2 manual if anyone has any of these in PDF to share or email that would be very cool.

If anyone here is looking for anything I probably have it. Including software wintrac 4.6, reefer manager, SR2 diagnostic tester rev3, ibox 5308, dataview dos, optiset 3.26 rev and way to many more to name off here.

Regards R-T

[pedrefer]

We have a box with XMT-50 now operating as a stationary unit removed from road chasis, powered by 3 phase 230 volt.

I am Looking for a manual and any information in retrofiting to R134a.

[absolute-zero]

We have a box with XMT-50 now operating as a stationary unit removed from road chasis, powered by 3 phase 230 volt.

I am Looking for a manual and any information in retrofiting to R134a.

Hi pedrefer,

I see your new here to RE, welcome aboard.:)

Why not convert the sytem to (MP66 R401b). The cooling capacity is better and the sytem is more forgiven to this basic conversion.

[paulo almeida]

go to web site o fdupon and the have refrigerant for conver direc, not need oil poe

best regards

[absolute-zero]

go to web site o fdupon and the have refrigerant for conver direc, not need oil poe

best regards

http://www.refrigerants.dupont.com/Suva/en_US/products/suvamp66.html

[SKOOBY]

Yes i agree MP66 is the way to go.May have manual will let you know

[micki_kp]

I am looking for a wiring diagram for a thermo king some dummy took the wiring harness out of the unit before they were ready to replace it. any help would be grately appreciated.

thermo king
model sll-38 max
b.m
092039
serial # 0518819091
ref
r502 16 lbs
thank you in advance.

[Big John]

contact Amer Basaeed @Abbar jeddah

[micki_kp]

do you have an email address?

[clivemtk]

how old is the version of reefer manager

[Brakefield Man]

I have a manual in PDF for you, its 19meg...contactme off list.
John.

I understand you have a PDF Manual for Thermking CFII-M40, is it possible to forward me a copy?

Cheers

peterkelly@spxservices.co.uk (peterkelly@spxservices.co.uk)

[icecube51]

:off topic:why not make a WIKI somewhere on this forum ,where we can drop all kinds of manuals, or schema's from simple split to highly sofiticated units.
so if someone needs it ,he can simply daownload it.;)

its only an idea,
Ice

[absolute-zero]

:off topic:why not make a WIKI somewhere on this forum ,where we can drop all kinds of manuals, or schema's from simple split to highly sofiticated units.
so if someone needs it ,he can simply daownload it.;)

its only an idea,
Ice

Copyright of proprietary documents can result in lawsuits based on violation of infringements acts.

Tread the waters carefully as big sharks swim here.

A-Z

[Reeferjon]

What AZ said....

[Big John]

TP. dont forget that some xmt units had tukomski engines fitted. I think they were for the US market.we used to get a few in jeddah...