goshen
05-02-2012, 01:11 PM
Hi:(
has anyone encounterd a fault,where after power failure of about an hour ,
controller comes on ,and displays "no configuration,please upgrade software"
after dropping the main again for a minute or so, and turning power on again controller is back to normal operation ,could this be the eprom battery?
any advice happily accepted!
thx
has anyone encounterd a fault,where after power failure of about an hour ,
controller comes on ,and displays "no configuration,please upgrade software"
after dropping the main again for a minute or so, and turning power on again controller is back to normal operation ,could this be the eprom battery?
any advice happily accepted!
thx