PDA

View Full Version : three phase current imbalance







Ulderico
30-01-2012, 08:42 PM
Hi,
I have flashing alarm (code 44 - three phase imbalance) on our freezer Thermoguard uP-D after having problem with our electricity. Now that we have stable electricity, I can't clear or reset the fault even after pressing ALARM and ENTER.

Any help is appreciated! Thanks.

goshen
30-01-2012, 09:37 PM
Hi
you might find this interesting,
http://www.corp.carrier.com/StaticFiles/Carrier.com/Carrier Brand Sites Content/Carrier_Transicold_Performance_Parts/Files/Products/Container/Electronic Repair Service/62-11191.pdf (http://www.corp.carrier.com/StaticFiles/Carrier.com/Carrier Brand Sites Content/Carrier_Transicold_Performance_Parts/Files/Products/Container/Electronic Repair Service/62-11191.pdf)
however the second link is what i think you are loking for.
http://www.thtrailers.com/downloads/ThermoKing/User_manual_SL_Trailer_English.pdf (http://www.thtrailers.com/downloads/ThermoKing/User_manual_SL_Trailer_English.pdf)
good luck