View Full Version : Sab128hf
bezar
23-01-2012, 10:25 AM
Hi guys
Does anyone have data on capacity for two SAB128HF compressors, one for high stage with 110 kW motor and one for low stage with 37kE motor. High stage means -10/35, low stage means -40/-10C
Refrigerant NH3. Thanks in advance
Sandro Baptista
23-01-2012, 01:50 PM
Bezar,
Please specify: MK and 50 Hz or 60 Hz.
Persi
06-02-2012, 08:16 AM
Hi Bezar,
Do You have informations about swept volume?
For high stage compressor Q is about 350kW.
Pozdrav ;)
Josip
12-02-2012, 04:31 PM
Hi, Bezar :)
Hi guys
Does anyone have data on capacity for two SAB128HF compressors, one for high stage with 110 kW motor and one for low stage with 37kE motor. High stage means -10/35, low stage means -40/-10C
Refrigerant NH3. Thanks in advance
Please, check attached document, hope it will be of some help to you ;)
8611
Best regards, Josip :)
Sandro Baptista
13-02-2012, 11:43 AM
Hi, Bezar :)
Please, check attached document, hope it will be of some help to you ;)
8611
Best regards, Josip :)
Bezar,
Attention shall be made as the compressor block you have can be MK2. So there is some difference on capacity an on the intermediate pressure. In practice it's not much meaningful.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.