PDA

View Full Version : Alignment







Methodius
21-01-2012, 11:29 AM
I am looking for a good alignment manual/book online. can someone help me?

Thanks in advance.

install monkey
21-01-2012, 11:47 AM
http://www.amazon.com/Alignment-Handbook-Dekker-Mechanical-Engineering/dp/0824796667

NH3LVR
21-01-2012, 01:43 PM
http://www.carlylecompressor.com/Files/Carlyle_Compressor/Local/US-en/documents/039-185_5FHShaftAlignment_lowres.pdf
All you need to know.

Grizzly
21-01-2012, 02:07 PM
brilliant post NH3LVR.
Got to spread the love, sorry no points this time.

Methodius.
Follow the link for more info. Original source unknown (from a training manual!)
http://www.mediafire.com/?e81160dpv7auoqk


Grizzly

Sandro Baptista
22-01-2012, 01:25 AM
NH3LVR and GRIZZLY,

Good documentations you have got. NH3LVR's documentation it seems old but of course still very complete. How many years has that document NH3LVR? On that time laser measurement didn't exist yet as is on GRIZZLY's documentation :)


Thanks guys

Sandro Baptista
22-01-2012, 01:28 AM
install monkey,

You doc seems also good just but it's pity I can save it...we have to buy it.

Methodius
22-01-2012, 08:44 AM
Thanks a lot guys, verry useful.

moideen
22-01-2012, 12:41 PM
http://www.carlylecompressor.com/Files/Carlyle_Compressor/Local/US-en/documents/039-185_5FHShaftAlignment_lowres.pdf
All you need to know.
very useful link,thanks NH3
MOIDEEN-DUBAI

NH3LVR
22-01-2012, 05:08 PM
That has been around for awhile. I have know idea when it was published.
I also found this interesting article.
http://www.ludeca.com/casestudy/SoftFoot_P&SSept05.pdf
Googleing "remedy soft foot motor alignment" will bring up some interesting information.
I always liked aligning motors. So many people considered it a Black Art, but it really is not. With practice you can put them within .001 inch all day. A dual Dial Indicator setup is a lot nicer than only having one.