Husky C-10 Display Cabinet, need a replacment Thermostat were from??

[fenair]

Hi all
Got a customer with a husky c-10 merchandiser cab, with a duff stat, these are located on the top door mullion, and are a flush fit, wilt a phile about a meter long, operation is by turning with a screw driver , no knob.

Can someone point me in the right direction for a replacement please..

Thanks in advance
Pat..

[Northdude]

Is this for a standard Husky C10 double door upright fridge? If so can u not just fit a standard ranco stat? if its a different fitting etc to standard stats get the model and serial number and try these huskytechnicalservices.com or as catering or pentland etc and get the orignal one.

[fenair]

Thanks for the reply, in answer, i have contacted Husky today, who now no longer hold spares for there product!!, its now been outsourced to capital cooling, who i rang, who sadly have not got any parts in stock due to the fact that they have just taken over the control of the spares responsibility, the guy on the phone , bless him, could not find no reference to a stat for the c-10, in fact he could find no reference to any thermostat to any husky display cab!!!.

So on that note i have ordered up a ranco vb7 and will have to fit it to either the external top, or try to mount it to the internal, some were i don't know, as the original is mounted behind the l/h door top mullion, and is a flush fit with no protruding adjuster knob, as there is no space to fit a universal, this is why i wanted a original if possible, rather than bodge the job...

Thanks for your comment ..

Regards
pat...

[Northdude]

No problem, must be pretty old as i havent stumbled over one of them stats before, its a nightmare when you gotta make adjustments when you cannot get orignal parts but the customer will prefer a bodge anyday rather than shell out hundreds for a new cabinet (well most of mine would anyway) :p

[fenair]

My sentiments, its not good having to plonk a bit on the side, but its the cheap option, the cab suprisingly is a 2008 model, !!

hey ho.... thats the budget range for you....

Pat

[Andy W]

I would fit a Ranco commercial stat on top of the cabinet with adjustable dif as from experience stats can be a pain, cutting out premature, icing up, a whole new host of problems can be created, fit a Ranco like I say and you have full control, you can control by air temperature or evap temperature, that is what I did on my last Husky.

[Spanner monkey]

You can get spares for the c range from AHT 01280 826600, ask for Darren, he's helped me out loads in the past and knows his stuff.