View Full Version : reclaiming concerns!!!
hi there just seeing if it was possible to reclaim refrigerant from a condenser while its not working at all with out a reclaim unit or recovery bottle????
the reclaim unit we use is currently getting serviced (stuffed)
is there any way of pumping it down???? vac pump???
cheers
750 Valve
09-01-2012, 09:24 AM
....... No.
monkey spanners
09-01-2012, 10:18 AM
Many wholesalers have reco units for hire, or failing that subcontract the job to someone with more experience.
chillerman2006
11-01-2012, 09:22 PM
I think the 'eson' was missing JOKesonU
install monkey
11-01-2012, 10:54 PM
i use an aspen perisaltic,as it will syphon up 1 mtr,self priming,and has an overrun facility to ensure all gas is reclaimed,small,easy to carry on rooftops,and the 1/4 connectors are ideal,also it is ip55 rated-pulls about 12kg/hour
The Viking
11-01-2012, 11:02 PM
IM, I never thought of that...
But only 12 kg/h.
Hmm, what do you think it will do in push/pull mode?
Would save my back :D
monkey spanners
11-01-2012, 11:19 PM
Wet and dry Henry, bags the gas up nicely :D
MikeHolm
12-01-2012, 12:19 AM
i use an aspen perisaltic,as it will syphon up 1 mtr,self priming,and has an overrun facility to ensure all gas is reclaimed,small,easy to carry on rooftops,and the 1/4 connectors are ideal,also it is ip55 rated-pulls about 12kg/hour
got a pic ?
BradC
16-01-2012, 04:06 PM
Before I bought a reclaim unit, I used a freshly vacced cylinder in an esky (cooler, chilly-bin..) surrounded by dry ice and bathed in methylated spirits. ~-70C will pull most stuff out slowly.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.