thermoking sltci

[froggy]

hi how to change from farenheight to celcius ?

[cadwaladr]

you need to get into the guarded parameters,trawl the posts it is there somewhere i will keep looking for the post.

[Robert Hilton]

Assuming it's SR1
Unit on, in continuous mode no alarms and not running.
Press TK and Clear together and hold until hourmeters appear.
Scroll to DDUR, press TK/Clear and hold until CRA1 appears.
Scroll to Deg and select.
Change with up/down and press enter

Off the top of my head

[tsimarelis]

hi guys i have an SLtci with -36 alarm and it doesnt come off even in
the Sguarded access.you think is the micro?

[mjreefer]

is the standby icon on the screen ? if so check correct voltages through engine/electric switch and that PCB is in good condition no tracking, if all good try a cold start before replacing processor.